rolled metal

Theory Research on Forming Characteristic of High Strength Hot Rolled Sheet Metal

高强度热轧钢板成形特性的理论研究

Aimed at ungraded network carbon compound in heavy cross-section bearing steel occur during the cooling process of being cooled, which is caused by slow cooling speed, simulation experiment was carried on to study rolled metal clipped from field by using of home-made equipment in the lab.

针对大端面轴承钢在轧后冷却过程中由于冷速过慢引起碳化物网状不合问题，利用实验室自制设备，对从现场剪取的轧材进行了模拟实验研究。

As the liquid core rate increases, concave deformations increased on the top and bottom surface of a rolled metal;

在有液芯存在时，轧件的上下表面向内凹陷，侧面易于形成单鼓变形，并且随液芯率的增大而增大；

During operation of rolling or refrigeration transportation process later, all kinds of shape defect often are produced by rolled metal.

轧材在轧制过程或在以后的冷却和运输过程中经常会产生种种形状缺陷。

Roof Construction of Rolled Metal and Membrane Structure for Large Indoor Stadium

压延金属+膜结构的大型体育馆屋面施工

Choose of the technology parameter of cylinder's rolled metal

油缸镗滚压工艺参数选择

Analysis of springback factors for U-bending hot-rolled metal sheet parts

热轧钢U形件弯曲回弹影响因素的分析